Thank you for purchasing the exciting new Pro LED Par 64 stage light from Star Light and Magic. Each unit is thoroughly tested and carefully packed before leaving our factory straight to you, our valued customer. Please check your package immediately upon arrival for any outward signs of damage to the shipping box. If you notice any tearing, crunching or bent areas, then keep your packaging material and box until such a time as you are satisfied that your light has not been damaged in transit. If you do notice any damage to your light, please notify us immediately so that we may file an insurance claim on your behalf and go about replacing your damaged unit.
The Pro LED Par64 light represents that latest in lighting technology, and is part of Star Light and Magic’s continuing effort to introduce the newest and best-built products to our valued customers. This unit can be used as a stand-alone fixture, in a Master/Slave configuration or controlled by any standard DMX light board.
Customer Support:
Star Light and Magic maintains customer support 7 days a week through email: info@starlight.com. Most questions will be addressed within an hour if submitted between 10 a.m. and Midnight, 7 days a week.
Do not attempt any repairs yourself, doing so will void the warranty.
Warning!
Do not expose this unit to rain, snow or moisture of any kind. Electrocution may result.
90 Day Limited Warranty
Star Light and Magic, inc. hereby warrants to the original purchaser this product to be free of manufacturing defects in material and workmanship for a period of 90 days from the date of purchase. This warranty shall be valid only if the product is purchased and used within the
Instructions
Rear of Unit:
You will notice that are four items on the rear of the LED stage light. A DMX in and out, a microphone sensitivity knob, and a dip switch. The red dip switches allow you to set the stand alone mode of operation, or set the address for DMX operation.
Stand Alone Mode:
You will notice that the “ON” position of the dip switches is actually in the down position as you face the dip switch.
Chase Modes:
1. Single Color Chase. This causes the unit to cycle through Red, Blue and Green automatically. Dip Switch #5, #8 and #10.
2. Bi-Color Chase. This causes the unit to cycle through bi-color mixes automatically. Dip Switch #4, #8 and #10.
3. All Color Chase. This causes the unit to cycle through tri-color mixes automatically. Dip Switch #8 and #10.
Single Color without controller:
1. Red. Dip Switch #1, #8 and #10 in the “ON” position.
2. Green. Dip Switch #2, #8 and #10 in the “ON” position.
3. Blue. Dip Switch #3, #8 and #10 in the “ON” position.
4. Purple. Dip Switch #1, #3, #8 and #10 in the “ON” position.
5. Yellow. Dip Switch #1, #2, #8 and #10 in the “ON” position.
6. Aqua. Dip Switch #2, #3, #8 and #10 in the “ON” position.
7. Purple. Dip Switch #1, #2, #3, #8 and #10 in the “ON” position.
Master / Slave Mode:
For the Master unit, set dip switches #8 and #10 to “ON” (others “OFF”). The Slave units should be have dip switches #8, #9 and #10 to “ON”.
Sound Active Mode:
This will cause the unit to flash in response to the beat of the music. The sensitivity knob can be adjusted to pick up the musical beat. The unit will not respond to quiet music or high notes.
1. Red Sound Mode. Dip switch #1 and #10 “ON”.
2. Green Sound Mode. Dip switch #2 and #10 “ON”.
3. Blue Sound Mode. Dip switch #3 and #10 “ON”.
4. All Color Sound Mode. Dip switch #5 and #10 “ON”.
DMX:
When using DMX, dip switch #10 should be in the “OFF” position. DMX address is set using the dip switches on the rear of the unit. The unit features five DMX channels, so the DMX setting for unit #1 would be dip switch #1 only. You would add 5 (number of channels) to this number to get a numerical value of 6 for your next unit, which would be dip switch #3 and #2 (4+2). The 3rd unit would have a numerical value of 11, making the dip switch combination #4, #2 and #1 (8+2+1). The 4th unit with be 16, using dip switch #5 by itself and so on. For a better explanation of binary code and how it works, go to the lighting controller section of our web site for a tutorial:
Technical Specs:
Power Supply: 120 V AC only
Power Consumption: 40 Watts
Fuse: 250V, 1.0 Amp
DMX channels: 5
DMX Connection: 3 pin XLR
Number of LED’s: 168, high output, 10 mm.
56 LED’s of each color.
Flash Rate: Max: 10 Hz
Weight: 5.5 lbs
Copyright 2007, Star Light and Magic, inc.