Congratulations, you have just purchased one of the most advanced and reliable followspots available - utilizing the latest technology to give you reliable performance for years to come! The followspot comes with a number of built in options, and additional bulbs can be purchased from our website at www.StarLight.com

Setup:

Attach the top of the stand and attach it to the yoke with the two screws and bolts (included). Attach yoke to both sides of followspot and attach followspot to stand. Bulb is included and installed. All units are tested prior to shipping.

Acess is easy. Unplug first, then simply unscrew both end screws (phillips screws) and slide top back to expose area for bulb changes.

Operation:

Operation is simple. Please keep in mind that the followspot does require a brief warm up period. Upon initially plugging the followspot in, the unit will click for approximately 30 - 60 seconds as it sets up and adjusts the internal controls. The unit uses a high intensity discharge lamp, which is much brighter than other styles, but can not be unplugged and then immediately turned on again without a sufficiant cool off period.

Color:
Push button above color choice. Unit will imeediately cycle to chosen color.

Iris:
Press and hold top iris button to make larger diameter followspot circle, and hold lower button to shrink down beam size.

Strobe:
Push and hold strobe button to make light flash.

Shutter:
Press button to close beam, press button again to open beam. This will give the appearance of beam shutting off and on again.

Reset:
Push reset button to restart bulb.