Congratulations, you have just purchased one of the most advanced and reliable little confetti launcher kits available - utilizing the latest technology to give you reliable shot after shot after shot. The Confetti Gun Kit comes with an assortment of confetti and streamer options, and additional confetti and Co2 can be purchased from our website at www.StarLight.com

It's easy, and takes less than a minute!

Load in your confetti and/or streamers. Push them in but BE CAREFUL not to jam them in too tightly or the confetti may become "clogged" or the streamers might not open properly. WARNING: If confetti is loaded too tightly, then this can cause the launcher not to fire correctly, or cause a possible hazard whereby the launcher jams or comes apart. DO NOT CRAM CONFETTI INTO LAUNCHER.

Stacked confetti will travel further, and you can fit more confetti into the launcher this way. Loose confetti will not travel as far and will take longer to load, but is more economical.

To Load Streamers, remove and discard the outer wrapping and unravel a small amount. This allows the streamers to unfurl properly when launched.

Screw in 8 gram Co2 cylinder. Make sure trigger is in closed position as shown.

To activate launcher, grasp ring and pull. Confetti will launch immediately.

Arming: Do not arm launcher until ALL other preparations are finished. Each individual should be responsible for loading their own device. Caution: DO NOT point at yourself or anyone else during or after installation of CO2.

Cautions:

1. Never point the muzzle directly at a person or animal - always aim up over people's heads.

2. Never use any foreign material in your confetti launcher.

3. CO2 containers get extremely cold after firing, do not remove without glove or rag - or wait a few minutes for CO2 to warm up.

4. Hold away from body when firing, so that neither end is pointed toward you or anyone else.

Misuse is dangerous. Star Light and Magic is not responsible for accidents that occur while using this product.